Service Manual Chapter8. CDU (Cash Dispenser Unit)
©
Nautilus Hyosung, Inc.
All Rights Reserved.
8-17
2) CS8 (Encoder sensor)
Remove the M3 screw of the CS8 sensor bracket (1 place).
①
Remove the connector and the cable toe to remove the sensor bracket. Be
②
careful not to break the connector pin when removing.
Press part of the sensor gently as shown in the figure below to remove the
③
②
lock and the sensor.
To insert the sensor, insert the part first, then press part to lock.
④
①
②
Assemble in the reverse order
⑤
- ~ .
③ ①
<Note!>
Make sure that the sensor always faces towards the center of the encoder shaft as
shown in the following figure.
ENCODER
44135304
