manualshive.com logo in svg

Nautilus Hyosung MX5300CE, Service Manual

Share
Download
Nautilus Hyosung MX5300CE Service Manual Download Page 140

 

Service Manual                                                                                                            Chapter8. CDU (Cash Dispenser Unit) 

 

 

                                                                                   

© 

Nautilus Hyosung, Inc. 

All Rights Reserved.

                                                 

 

8-15

 

8) CS13T 

 Remove the M3 screws (1 

①

place) of the sensor bracket. 

 Remove the connector and the cable tie to remove the sensor supporter. Be 

②

careful not to break the connector pin when removing. 

 Remove the sensor bracket.

③

 

 Remove the M3 sensor fastening screws from the removed sensor bra

④

cket. 

 Replace the sensor.

⑤

 

 Assemble the unit in the reverse order 

⑥

-  ~ . Make sure to fasten the spacer 

④ ①

and the screw end is not protruding out to the other side of the bracket. 

 

 

 
 
 
 
 

Summary of Contents for MX5300CE


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands