Service Manual Chapter9. Safe Unit
©
Nautilus Hyosung, Inc.
All Rights Reserved.
9-3
5. Push the bar into the hole until it clicks in the dial change hole (Fig.9.4) inside the
vault door and turn to the right by 90 degrees. (Fig.9.5)
Fig.9.4 Fig.9.5
6. Turn the dial to the left. Make at least four complete rounds and position the scale to
“10” (target number to change), as shown in the Fig.9 6.
7. Turn the dial to the right, make three complete rounds then position the scale to “50”
(target number to change), as shown in the Fig.9.7.
8. Turn the dial to the left, make two complete rounds and position the scale to “70”
(target number to change), as shown in the Fig. 9.8.
Fig.9.6 Fig.9.7