Sharp XE-A207 Service Manual Download

Page: 1 / 25

CODE : 00Z

SERVICE MANUAL

CONTENTS

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with specified

ones for maintaining the safety and performance of the set.

This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

XEA207SM2E

LEAD-FREE SOLDER MODEL

ELECTRONIC CASH REGISTER

XE-A207
XE-A217

MODEL

XE-A307

CHAPTER 1. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CHAPTER 2. INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

CHAPTER 3. MASTER RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CHAPTER 4. MAINTENANCE, DISASSEMBLY AND ASSEMBLY . . 16

CHAPTER 5. HARDWARE DESCRIPTION . . . . . . . . . . . . . . . . . . . 26

CHAPTER 6. DIAGNOSTIC PROGRAM DESCRIPTION . . . . . . . . 30

CHAPTER 7. PWB LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

CHAPTER 8. CONNECTOR PIN LAYOUT . . . . . . . . . . . . . . . . . . . 40

XE-A207W/B

XE-A217W/B

XE-A307

Summary of Contents for XE-A207


























Search results

Summary of Contents for XE-A207

Reviews:

Related manuals for XE-A207

Brands by name

Popular brands

Sharp XE-A207, Service Manual

Search results

Summary of Contents for XE-A207

Reviews:

Related manuals for XE-A207

Brands by name

Popular brands