NARDA PMM 9010 Series User Manual Download

Page: 114 / 284

11-2

PMM 9030/9060/9180 Frequency Extension

11.2 Instrument Items

PMM 9030/9060/9180 include the following items:

•

EMI receiver from 30 MHz up to 3/6/18 GHz;

•

BP-02 Li-Ion battery pack;

•

SPA-01 Plug-in AC Supply Adapter;

•

External power supply/battery charger;

•

20m Fiber Optic Cable;

•

N-N

adapter

•

Operating Manual (included in PMM 9010 Manual);

•

Certificate of Compliance.

11.3 Optional PMM
accessories

PMM 9030/9060/9180 can be used with several optional accessories, the
most common being the following:

•

BC-01: Biconical Antenna (30 – 200 MHz)

•

BL-01: Biconical Log Periodic Antenna 30 MHz to 6 GHz

•

DR-01: Double-ridged Horn Antenna 6 to 18 GHz

•

LP-02: Log Periodic Antenna 200 MHz to 3 GHz

•

LP-03: Log Periodic Antenna 800 MHz to 6 GHz

•

LP-04: Log Periodic Antenna 200 MHz to 6 GHz

•

TR-01: Antenna Tripod

•

Antenna Set AS-02 (BC01+LP02+TR01)

•

Antenna Set AS-03 (BC01+LP02+LP03+TR01)

•

Antenna Set AS-04 (BC01+LP04+TR01)

•

Antenna Set AS-05 (BC01+LP04+DR01+TR01)

•

Antenna Set AS-06 (BC01+LP02+LP03+DR01+TR01)

•

Antenna Set AS-07 (BL01+TR01)

•

Antenna Set AS-08 (BL01+DR01+TR01)

•

AMK-01 Antenna Mounting Kit (for BC-01, LP-02, LP-03, LP-04, AS-02,

AS-03, AS-04, AS-05 and AS-06)

•

AMK-02 Antenna Mounting Kit (for BL-01, AS-07 and AS-08)

•

VDH-01: Van der Hoofden Test Head 20 kHz to 10 MHz

•

RF-300 : Van Veen Loop

•

SB-600 : Automatic Slide Bar for radiated power tests

11.4 Other accessories

Of course, the PMM 9030/9060/9180 can be used with any other
accessories available on the market, like:

•

Antennas and loops, any type;

•

Near Field Probes;

•

Various TEM and GTEM Cells.

Summary of Contents for PMM 9010 Series





























































































































































































































































































Search results

Summary of Contents for PMM 9010 Series

Reviews:

Related manuals for PMM 9010 Series

Brands by name

Popular brands

NARDA PMM 9010 Series, User Manual

Search results

Summary of Contents for PMM 9010 Series

Reviews:

Related manuals for PMM 9010 Series

Brands by name

Popular brands