NanoEnTek JuLi Stage, User Manual

Page: 5 / 150

Safety and compliance
JuLI™ Stage - User Manual
5
1
Safety and compliance
1.1 General safety precautions

If water or other material enters the instrument, adaptor, or power inlet,
disconnect the power cord and contact a service person. For operating
environment, refer to Product Specifications.

Do not touch the main plug or power cord with wet hands.

Always ensure that the power supply input voltage matches the voltage
available at your location.

This instrument is air-cooled and its surfaces may become hot during operation.
During installing, leave a space of more than 10 cm (4 inches) around the
instrument and do not place any objects between the instrument and the walls.

Do not install the instrument on a slant or a place prone to vibrations, which
induces the risk of instrument malfunction or damage of the instrument.

Never insert any objects into the air vents of the instrument as this could result
in electrical shock, personal injury, and equipment damage.

Plug the power cord firmly into the wall outlet and AC adapter.

To avoid potential shock hazard, make sure that the power cord is properly
grounded.

Be sure to position the equipment such that it is easy to disconnect.

Turn off the instrument before unplugging the power cord and/or moving the
instrument.

If the instrument is dropped or broken, disconnect the power cord and contact
a service person. Disassembling the case will void the warranty.

Use only authorized accessories (adaptor, power cord, and USB drive).