JuLI™ Stage STAT Software
JuLI™ Stage - User Manual
119
One condition is when more than one field was acquired in an experiment as shown
in this example: 5 positions inside the wells were measured:
In the
Plate Graph
tab automatically only one curve per well is displayed and only
the selected numerical readouts (mean or median, together with standard deviation
or standard error etc.) are exported to the Results table.
☞
Note: The results for each position in a well will be accessible in the
Well Graph
tab and can be exported as Graph or numerical readouts there. See later in this
chapter.
☞
Note: It is not possible to exclude single positions in a well from neither the
analysis nor the calculation of mean / standard deviation etc. They can be excluded
from graphs, though.
The other case, where
Data Type Mean
or
Median
, as well as all
Error Bar
options
are accessible is when a plate map (created in
Plate Editor
) is available for the
measurement project. Here, the software needs to know where well repeats are
located in order to calculate mean values and their and standard deviation.
☞
Note: More details on how to create a plate map using
Plate Editor
please refer
to chapter 12.2.3
In our example, triplicates were located column-wise and 7 concentrations were
tested. A plate map was created naming the concentrations 1 to 7 and assigning
different colors to triplicates:
Summary of Contents for JuLi Stage
Page 1: ......