© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
83
Contents
6. Default / basic adjustments
(continued)
6.1 Replacing Knives
(continued)
6.1.4 Placement Lower Knife
Placement
No. Action
Remarks
1
Grease the bottom side surface of the Lower Knife [1] (not the
paper side!) a little bit and the Knife position on the Beam [2].
(See 1 & 2)
2
Place the Lower Knife on the Beam against the Screws [M] (3x)
(See Fig. 6.10)
3
Place the Screws [F] with normal Washers (6x) back.
4
Place a Safety Block between the Lower Knife and Upper Beam
(See 3)
5
Turn the Screws [F] a little bit in the Lower Knife so the top of the
screws do not stick out and the Lower Knife is hard to move.
6
Remove the Safety Block
7
Continue Adjustment Lower Knife.
(See Chap.
6.1.7
)
2
1
M
F
3
