© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
44
Contents
5. Troubleshooting
(continued)
5.1 Service program mode
(continued)
5.1.7 Non Volatile Memory (NVM)
NVM values (non volatile memory) are different address locations within the EE-prom.
Each address reflects timing,calibration,counter or function in the system.
Fig.
5.24
Fig.
25
Fig. 5.26
No. Action
1
Enter the Service Program mode [see Chapter
5.1
]
2
Use the ‘
▲
/
▼
’ buttons to select ‘NVM’ and press the ‘Enter’ button.
3
Use the ‘
▲
/
▼
’ buttons to select the NVM setting that need to be checked or changed and press the
‘
’ or ‘Change’ button.
4
Use the ‘
+ / -
‘ buttons to set a NewValue(Dec) and press the ‘OK’ button.
5
Press the ‘ESC’ or ‘
’ button to exit the Service Program mode and enter the Operator mode.
