© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
86
Contents
6. Default / basic adjustments
(continued)
6.1 Replacing Knives
(continued)
6.1.7 Adjustment Lower Knife
Fig. 6.10
Adjusting
No. Action
Remarks
1
Gently push the Lower Knife against the Upper Knife [ 1 ].
Feel that the Knives touch on
both sides (See 1)
2
Gently raise the Upper Knife to top position using by turning
Crank [P] with a 13mm Wrench.
(See Fig. 6.9)
3
Tighten Screws [G] 1-2
(See Fig. 6.10)
4
Turn Screws [M] (3x) until they touch the Lower Knife.
!!!
Do not force the Screws, they only need to touch the Knife
(See Fig. 6.10)
5
Trim a booklet 4 sheets.
Very slowly
lower the Upper Knife by turning Crank [P].
!!!
Check that the Upper Knife does not touch the top of the
Lower Knife.
When it does hits the top of the
Lower Knife, pull back the
Lower Knife and repeat
procedure “
Adjustment Upper
Knife
” No. 1.
N
L
M
5 1 3 4 2 6
CCW
CCW
CCW
F
G
1
