© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
111
Contents
6. Default / basic adjustments
(continued)
6.5 Adjusting Side Joggers
(continued)
Fig.
6.44
Fig.
6.45
Fig.
6.46
Removal/Replacing
No. Action
Remarks
9
After selecting a Motor, press the ‘In’ button
2 TIMES
to move the
selected Side Jogger forward against the Lower Knife.
!!!DO NOT PRESS THE ‘IN’ BUTTON MORE THAN 2 TIMES!!!
(See Fig. 6.45)
The Side Jogger move toward
the Lower Knife and after 2
times the Side Jogger will
squared itself against the
Lower Knife.
10 Tighten the bolts M6 (2X) [C]
(See Fig. 6.46)
11 After checking press the ‘OFF’ buttons to change the Status of the
Motor back in the ‘normal’ situation.
12 Press 3 times the ‘
’ button and ‘Exit’ to exit the Service
Program mode and enter the Operator mode.
13 Place Front or Rear Cover.
(See Chap.
4.1
or
4.2
)
14
After adjusting the Side Joggers continue chapter ‘ 8 NVM Values’
to calibrate the Side Jogger correction NVM values.
8.2.2 NVM Side Jogger
correction
C
1 time
2 times
