© Ernst Nagel GmbH 2S Trimmer Service Manual en.doc Rev.1.0. 20.07.2011
110
Contents
6. Default / basic adjustments
(continued)
6.5 Adjusting Side Joggers
Fig.
6.40
Fig.
6.41
Fig. 6.42
Fig. 6.43
Removal/Replacing
No. Action
Remarks
1
Place (new) Side Jogger and
DO NOT
tighten the bolts M6 [C] yet.
(See Fig. 6.41)
2
Connect Connector J7/P7 or J6/P6 [A]
(See Fig. 6.40)
3
Connect Side Jogger wires P-s P-motor8 or P-s
P-motor7 [B]
(See Fig. 6.40)
4
Connect the Side Jogger switch wires
(inside the Side Jogger bracket [D] ) : white S11-3 / S13-2
black
S11-1
/
S13-1.
(See Fig. 6.40)
5
After replacing, the Side Joggers need to be align squared
against the Lower Knifes, therefore continue No. 6.
6
Enter the Service Program mode
(See Chapter
5.1
)
7
Use the ‘
▲
/
▼
’ buttons to select ‘Motors’ and press ‘Enter’.
(See Fig. 6.42)
8
Use the ‘
▲
/
▼
’ buttons to select the Motor (M7 or M8) that needs
to be squared against the Lower Knife, press ‘Enter’ and continue
next page.
(See Fig. 6.43)
A
C
B
D
