Spitfire 100 Extreme series printers Users Guide
57
AP-75194 - Rev. 2.2
3.12.2
Transferring the printer
(1) Before the transfer
Follow the steps below to transfer the printer.
Step 1 :
Make sure the printer and winding system are switched OFF.
Step 2 :
Make sure the head is in the right edge position (capping position).
Step 3 :
Disconnect the power cables and all other cables.
Step 4 :
Higher all levelling feet.
Step 5 :
Install the 2 transportation arms.
Step 6 :
Transfer the printer.
Notes
The caster attached to the stand has been designed for transferring the printer during short
distances.
(2) After the transfer
Step 1 :
Follow the steps below to prepare the printer to be used after the transfer.
Step 2 :
Make sure that you place the printer on an adequate place
Step 3 :
Connect the power cable and other cables.
Step 4 :
Perform a nozzle check to check if the printer head has clogged.
Step 5 :
Perform a fine adjustment of image quality.
Step 6 :
Check if the winding system is still well aligned.
Caution
Before transporting the printer, contact your local Authorized Mutoh Dealer.
Summary of Contents for Spitfire 100 Extreme
