Spitfire 100 Extreme series printers Users Guide
119
AP-75194 - Rev. 2.2
6.5.1.15 Heater D menu
Set the temperature of the Drier.
Setup items
Parameters
Description
Heater D
OFF 50°C
Change drier temperature by operating the following keys.
[F2] key: to increase the setup value.
[F4] key: to decrease the setup value.
[ENTER] key: to confirm the setup value
[CANCEL] key: to cancel the setup value
6.5.1.16 HStatus menu
Check the temperature of the heating elements.
Press the [CANCEL] key to go to the previous menu.
Setup items
Parameters
Description
HStatus
A: B: C: D:
A, B, C, D = Heaters
O
means that heater is switched OFF
H
means that this heater is busy HEATING
C
means that this heater is COOLING down
T
means that this heater is ON TARGET (reached set temperature)
I
means that this heater group is initializing
E
means that this heater group is inside Error
Amb. T
Ambient temperature.
Heater Message
Possible error messages will be displayed on the last line. For example:
Err. Temp rise A
-
Summary of Contents for Spitfire 100 Extreme
