Spitfire 100 Extreme series printers Users Guide
49
AP-75194 - Rev. 2.2
3.9 SWITCH BETWEEN INK CONFIGURATIONS.
It is possible to switch from between ink configurations. Please follow the procedure below:
Important
In case of working with another type of Mutoh ink than described in this manual, refer to the
dedicated instruction sheet added to the ink kit.
Step 1 :
Remove all cassettes.
Step 2 :
Discharge ALL heads for 15 seconds.
Step 3 :
Insert Spitfire Cleaning Cassettes.
Step 4 :
Charge ALL heads for 3 minutes.
Step 5 :
Pull out all cassette
Step 6 :
Discharge ALL heads for 15 seconds.
Step 7 :
Put back the Spitfire cleaning cassettes.
Step 8 :
Charge ALL heads for 3 minutes.
Step 9 :
Remove all cassettes.
Step 10 :
Discharge ALL heads for 15 seconds.
Step 11 :
Use the arrow keys to change the ColorMode to 2x6 or 4x4 depending on the switch.
SetupMenu 5/7
InkManager
ColorMode
Step 12 :
Insert
Spitfire Mild Solvent ink Cassettes,
and Stabilizer liquid in case of 2x6, according to the ink
configuration label
Step 13 :
Charge ALL heads for 2 minutes.
Step 14 :
An Authorized Mutoh Technician has to shift or unshift head block 5 to 8.
Shifted
heads are needed when printing in 4x4 mode.
Unshifted
heads (in 1 line) are needed when printing in 2x6 mode.
Step 15 :
Perform a nozzle check and clean if necessary until all nozzles are present.
Notes
Please refer to Charge/Discharge-chapter for more details about these functions.
Summary of Contents for Spitfire 100 Extreme
