Spitfire 100 Extreme series printers Users Guide
50
AP-75194 - Rev. 2.2
3.10 UNATTENDED PRINTING OR LEAVE PRINTER IDLE
DURING NIGHT
3.10.1
Unattended Printing.
It is not recommended to leave the printer unattended. Some things should be checked frequently:
Is the media still going straight through the printer?
Arent there any head crashes or other media problems?
What if the printer stops printing for electronic, mechanic or firmware reasons?
To prevent production loss, it is recommended to control the above on frequent base. In some cases, a head
crash can occur, which means that the printer stops printing and that the head will be uncapped. This could
damage the printer irrevocably.
We advise installing a webcam when sending a print from another place from where the printer stands and to
set the following features:
Step 1 :
Before you send your last job to the printer be sure to
a. Perform a tubing flush with cleaning (Please refer to Daily Maintenance)
Clean the wipers with polyknit wipers and Solvent cleaning liquid.
b. Set your CapCycle to 1 hour.
Step 2 :
When you arrive in the morning follow this procedure
a. Perform a tubing flush with cleaning
(Please refer to Daily Maintenance)
b. Perform a nozzle check
c. Depending on the amount of lost nozzles, perform a normal or powerful cleaning until all
nozzles are back.
d. Switch OFF the CapCycle feature.
Summary of Contents for Spitfire 100 Extreme
