Spitfire 100 Extreme series printers Users Guide
116
AP-75194 - Rev. 2.2
6.5.1.8 Head Height menu
Head height can be changed to three levels according to media thickness.
Setup items
Parameters
Description
HeadHeight
Low
Make this setting when using media with a thickness of 80µm (0.08mm)
to 300µm (0.3mm).
Middle
Make this setting when using media with a thickness of 300µm (0.3mm)
to 700µm (0.7mm).
High
Make this setting when using media with a thickness of 700µm (0.7mm)
to 1000µm (1.0mm).
-
Notes
Set the height of the head in relation to the thickness of the media.
±
If the setting is set to "High" and the print is created on thin media, good quality print results will not
be achieved.
If the setting is set to "Low" and thick media is used, the media and print head will come into
contact and may result in damage to the product.
6.5.1.9 Vacuum menu
Set the intensity of the vacuum fans.
Setup items
Parameters
Description
Vacuum
Normal
100% of the capacity of the vacuum fans
Custom
Adjustable from 0% to 100%
-
6.5.1.10 Fan Mode menu
With this function ALL fans or only the fans under the media will be activated.
Setup items
Parameters
Description
FanMode
ALL
To activate all fans under the print surface
Automatic
To activate only the fans under the media
-
Summary of Contents for Spitfire 100 Extreme
