Spitfire 100 Extreme series printers Users Guide
32
AP-75194 - Rev. 2.2
3.4 MEDIA HANDLING
Loading, installing and setting media are very important handlings when you want to obtain a perfect print
quality. When the media is not loaded centrally, not
installed properly head crashes, banding can occur.
Also the complete winding system should be installed and aligned properly by an Authorized Mutoh
Technician.
3.4.1 Setting media type in detail
After lowering the pressure rollers, you will be asked
each time
to set the media type. Even if it is a sheet of
roll, different profiles are possible to select.
[F1]-key
Lever UP
[F2]-key
Browse through the media profiles
(lower left corner)
[F4]-key
Start media measurement using the
Selected profile in the lower left corner.
Please find below the different profiles and decide which one to use.
OFF
Roll LeftRight
(**)
Roll LeftRightTop
(**)
Roll to Roll
Sheet
Measurement
None
(*)
Left
Right
Left
Right
Top
Left
Right
Left
Right
Top
Bottom
Take Up
Not used
Not used
Not used
Used
Not used
SlantCheck
No
Yes
Yes
Yes
No
Cutting media
possible?
Yes
Yes
Yes
Yes
(no auto cut)
Yes
Cut Test
No
No
Yes
No
Yes
Feeder speed
Low
Low
Low
Low
High
(*)
Load the media at the right side of the printer. Position the media next to the media setting position (line of little holes in the
media guide platform). The maximum distance between the guideline and media is 5 mm. Set the width of the media in the
Utility menu in SetupMenu 4/7.
(**)
Use Roll LeftRight for flexible media and Roll LeftRightTop
for rigid media. In the second option, a media cut test will be
performed which means scrolling back and forward of the media (backwards feeding). When loading flexible media, it could
get stuck into the media groove and can cause head strikes.
Summary of Contents for Spitfire 100 Extreme
