MUTOH Spitfire 100 Extreme, User Manual

Page: 11 / 177

Spitfire 100 Extreme series printers – User’s Guide
11 AP-75194 - Rev. 2.2
Do not insert or drop metal or inflammable objects into openings, such as ventilation outlets. Doing so
may result in electrical shock and fire.
Do not touch the media guide during printing. It is hot and may cause a burn.
Do not touch the media feed slot, platen or media guide while heaters are operating. They are
hot and may cause a burn.
Stop using your machine if a liquid has been spilled into it. This may cause electrical shock or fire.
Switch the machine off as soon as possible, unplug the power cord, and contact your local MUTOH
dealer.
Be sure to power OFF the machine and unplug the power cable from the outlet before cleaning the
machine. Use a damp cloth to clean the machine. Do not use thinner, benzene, alcohol or other active
agents. Doing so may result in damage or paint peeling from the casing.
Do not bend or pull the waste fluid tube. Doing so may cause waste fluid to leak out and malfunction of
the product.
Do not tilt the machine, place it against a wall or turn it upside down. Doing so may cause ink to leak
inside the machine. Movement after transport is also not covered by the warranty.
When cutting roll media, be careful of the following. Incorrect handling can result in injury to the hands
and fingers from the razor blade.
±
When holding the media, do not place fingers over the media cut groove.
±
Move the razor blade slowly along the media cutting groove.
To prevent back pains and other injuries, always work with at least 4 people to unpack or move the
machine. Keep the machine horizontally during transportation.
Do NOT transport the machine to another room without contacting your local Authorized Mutoh Dealer.