MUTOH Kona 1400, User Manual

Page: 94 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
94 AP-75370 - Revision 1.1
Step 3:
The settings window opens. you are now able to change the tool settings.
Icon Icon name Description
Number
Set / Change the number of the selected tool.

In case a number is chosen which is already taken, the Kona suggests a new
number
Name
Change the name of the selected tool
Save the new name and return to the previous window
Cancel and return to the previous window without changing anything
Shift button, used for capital characters
Back button. Delete the last character of the name
Character set button. When pressing this button, you will switch
between:

Small characters - Large characters

Numbers

Language depended small characters - Large characters

Language depended signs
Switch between a Qwerty and an Azerty keyboard
Reset any changes done in the window back to the previous name.
Clear button. Clear the name string on the keyboard.
Type Decide if the selected tool is a knife or a pen
Velocity Set the velocity of the selected tool
Force
Set the tool force of the selected tool.
This is the amount of downward pressure that the cutter applies on the knife /
pen.
Offset
Set the tool offset of the selected tool. In case the selected tool is a pen, the
Offset button is disabled.
Location
For Kona apparel only!!
Position 1 is the standard location on the head base, position 2 is the additional
location mounted on the right side plate of the machine.
Note