MUTOH Kona 1400, User Manual

Page: 54 / 218

User’s Guide Kona / Kona apparel cutting plotter
Basics
54 AP-75370 - Revision 1.1
Both sensor 1 and sensor 2 are covered. The media width is determined by pressure roller 3.
Position the pressure rollers as follows:
Possibility 4
Loading full sized media.
Both sensor 1 and sensor 2 are covered. The media width is determined by pressure roller 3.
Position the pressure rollers as follows:
1
2 3
4 5 6 7 8 9 10 11 12 13
Schematic overview Kona / Kona apparel 1650
Position pressure roller 2 Position pressure roller 3
Kona / Kona apparel 1400 Disabled 5 - 7
Kona / Kona apparel 1650 Disabled 6 - 8
Note
Refer to
Pressure roller positioning warning on page 183
in case a warning message
appears.
1 2
3
4 5 6 7 8 9 10 11 12 13
Schematic overview Kona / Kona apparel 1650
Position pressure roller 2 Position pressure roller 3
Kona / Kona apparel 1400 5 - 7 8 - 11
Kona / Kona apparel 1650 6 - 8 9 - 13
Note
Refer to
Pressure roller positioning warning on page 183
in case a warning message
appears.