MUTOH Kona 1400, User Manual

Page: 199 / 218

199 AP-75370 - Revision 1.1
User’s Guide Kona / Kona apparel cutting plotter
Troubleshooting
6218
Media size
problem Check if the margins left, right, top and bottom are within the specifications.
It might be possible that the file you have sent is not correct

Did you sent the correct file
Refer to
Bounding box details on
page 152
Error
6221
Page problem
occurred
PG after job failed
Check the media size Error
6222
Page problem
occurred PG between 2 segments failed or the cutter is set to repeat mode and there
cannot be found a next job.
6223
No EPOS
reference found During search with EPOS laser, no edge was found
(colour <> white)

Refer to
EPOS read on page 138

If this does not help, change the
load mode. This problem could
occur due to the load mode front
and uneven media.
Error
6225
Possible data
clip detected
One or more frame points lie outside hardclip region. Plot data will be clipped.
Outer pressure rollers are inside
frame.
Refer to
Loading media on page 51
Warning
6226
Print distortion
bad rectangle
Original print distortion. No perfect rectangle, no parallel sides (difference > 3mm)
Bad print quality or outside specs.
Refer to
Bounding box details on
page 152
Warning
Error Message Description Solution Category