MUTOH Kona 1400, User Manual

Page: 121 / 218

User’s Guide Kona / Kona apparel cutting plotter
Operation panel
AP-75370 - Revision 1.1 121
4
Origin
Follow the procedure below to change/control the origin:
Step 1:
Press the following buttons in order:

Actions

Origin
Step 2:
The following screen is displayed:
Note

Be aware that this is the customized Origin setting. There is also a standard
origin. For more information concerning the standard origin refer to
Origin on
page 113
Item Information
Move the head to the left
Move the head to the right
Feed the media forwards
Feed the media backwards
Position of the knife tip.
Pressing
Cancel
after moving the head or the media results in the
head and media returning to its previous position.
Press
OK
to save the new origin.
Note

When a sheet-off action is performed the origin setting is reset.