Multi-Tech RouteFinder RF802EW User Manual Download

Page: 89 / 141

Chapter 7 - RouteFinder Monitor

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide

TCP/IP Tab

The

TCP/IP

tab displays all TCP/IP requests made by your network device. You may select

to view TCP/IP sessions for the WAN Ethernet or the Async Port.

1. The

TCP/IP

tab is the default tab displayed in the

RouteFinder Monitor

dialog

box. If it is not displayed, click the

TCP/IP

tab.

Note:

The TCP/IP sessions displays the history of the TCP/IP session through the

selected port. The TCP/IP information presented does not represent the current

status of the TCP/IP session.
The

TCP/IP

tab displays the following information:

Date/Time:

Indicates the date the request was made.

Port:

Indicates the port you are viewing.

Type:

Displays the type of request being made.

Local IP:

Indicates which IP address you have requested information from.

Remote IP:

Indicates which IP address was requested.

Port Number: Indicates which TCP/IP port was requested.

2. To exit RouteFinder Monitor, close the window.

Summary of Contents for RouteFinder RF802EW














































































































































Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands

Multi-Tech RouteFinder RF802EW, User Manual

Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands