Multi-Tech RouteFinder RF802EW User Manual Download

Page: 15 / 141

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide

Chapter 3 - Software Installation and Configuration

Using RouteFinder Setup Wizard

Note:

Before beginning this procedure, ensure that your RF802EW is properly

connected to the network and that the power is turned on.
After installing the software, you may return to the RouteFinder Setup Wizard at any

time, by clicking

Start

Programs

RouteFinder Manager

RouteFinder Wizard

Before running the Setup Wizard, it is strongly recommended that you exit all Windows

programs.

1. Insert the RF802EW System CD into your computers CD-ROM drive. The

RF802EW System CD window appears.

Note:

If Autorun is disabled on your computer, use Windows Explorer to view

the contents of the CD.

Double-click

the CD icon to display the RF802EW

System CD main window.

2. Click

Install Software

3. Follow the on-screen instructions to install the software.
4. When the software installation completes, the

Setup Wizard

dialog box

displays. Click

5. The

Setup Wizard: Device List

dialog box displays. The Setup Wizard

automatically checks your network for available network devices and displays

them.

Select

the device you wish to configure from the

Device Name

list.

Summary of Contents for RouteFinder RF802EW














































































































































Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands

Multi-Tech RouteFinder RF802EW, User Manual

Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands