Multi-Tech RouteFinder RF802EW, User Manual

Page: 112 / 141

112
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User G
uide
Accessing a Unix Server
Perform the following procedures to prepare your PC workstation to access a remote Unix
Server.
Adding the dial-up adapter (Unix Server Connection)
Windows 95/98/NT:
1. Click Start | Settings | Control Panel .
2. Double-click the Network icon to open the Network dialog box.
3. Click Add . The Select Network Component Type dialog box opens.
4. Select Adapter , then click Add . The Select Network adapters dialog box opens.
5. In the Manufacturers list, select Microsoft . In the Network Adapters list, select
Dial-up adapter .
6. Click OK twice to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your workstation to gain access to
a remote computer or network, even if your computer is not on a network.
1. Double-click My Computer , then double-click Dial-Up Networking . The following
message displays:
2. Click Install , then follow the on-screen instructions to configure your connection.
Adding TCP/IP (Unix Server Connection)
Windows 95/98/NT:
1. In the Network dialog box, Configuration tab, click Add .
2. Select Protocol and click Add .
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list
[Win95 only], select Microsoft . In the Network Protocols list, select TCP/IP
[Win95/98] or TCP/IP Protocol [WinNT only].
[ Note: Windows NT workstation has no Manufacturers list.]
4. Click OK twice to return to, and then close, the Network dialog box.
Set Up Properties of Components (Unix Server Connection)
Dial-up Adapter
Windows 95/98:
1. In the Network dialog box, Configuration tab, select the TCP/IP - Dial-up
adapter .
2. Click Properties . The TCP/IP Properties dialog box opens.
3. Ensure that Obtain an IP Address Automatically is selected. (It’s the default.)
4. Click OK to close the TCP/IP Properties dialog box.
Note: You must restart your machines to enable the new settings.