Multi-Tech RouteFinder RF802EW, User Manual

Page: 113 / 141

113
Chapter 8 - LAN Client Settings
Multi-Tech Systems, Inc. RouteFinder RF802EW User G
uide
Make Your New Connection (Unix Server Connection)
Windows 95/98:
1. Double-click My Computer .
2. Double-click the Dial-Up Networking folder.
3. Double-click Make New Connection (or Add New Connection , Win98).
4. Follow the on-screen instructions to configure your connection.
Windows NT:
1. Double-click My Computer .
2. Double-click Dial-Up Networking .
3. When the Dial-Up Networking dialog box opens, click Install .
4. Follow the on-screen instructions to configure your connection.
Set Dial-up type (Unix Server Connection)
Windows 95/98:
1. Right-click the newly created connection icon, then click Properties ; the My
Connection dialog box opens.
2. On the General tab, click Server Type . The Server Types dialog box opens. Select
PPP: Windows 95, Windows NT 3.5, Internet .
3. Select only the Log on to network , Enable software compression , and TCP/IP
check boxes. Note: do not change any other items that are already selected.
Dial into your network (Unix Server Connection)
Windows 95/98:
1. You are ready to dial in to your network.
2. Double-click the
new connection icon. The Connect To dialog box opens.
3. Enter the user name (if necessary) and password configured for you on the
RF802EW.
Note: If your particular situation permits, select the Save password check box.
4. Click Connect .
5. After connecting to the RF802EW, you can access the same services and resources
as if you were connected to the network locally.