Multi-Tech RouteFinder RF802EW User Manual Download

Page: 58 / 141

Chapter 6 - RouteFinder Manager

Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide

Upgrade Firmware

This options allow you to upgrade your RF802EW firmware. It upgrades the firmware of

your RF802EW, not the RouteFinder Manager or Monitor software.

Warning:

Upgrade the firmware of your RouteFinder RF802EW only under the advice and

direction of the Multi-Tech Technical Support Group. Improperly upgrading the RF802EW

may disable the device!

1. From the main

Manager

dialog box, click

Upgrade Firmware

2. The

Upgrade Firmware

dialog box displays.

3. Download the latest firmware from the Multi-Tech Systems web site at

www.multitech.com.

4. Copy the firmware to the directory containing the RouteFinder Manager program

files. Refer to the default

Firmware File Directory

box to determine the location of

the files on your system.

5. Enter the location of the new firmware file in the

Firmware File Directory

box.

RouteFinder Manager will automatically detect the new firmware file name and

display it in the

Firmware File Name

box. The version number of your firmware

will display in the

Firmware File Version

box.

6. Click

Upgrade

to upgrade your firmware.

7. A message displays stating the upgrade has started.
8. After several minutes, an informational dialog box displays indicating the upgrade

was successful.

9. Click

10. From the main

Manager

dialog box, click

Save and Exit

11.Click

Yes

to restart the RouteFinder using the new firmware version.

Summary of Contents for RouteFinder RF802EW














































































































































Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands

Multi-Tech RouteFinder RF802EW, User Manual

Search results

Summary of Contents for RouteFinder RF802EW

Reviews:

Related manuals for RouteFinder RF802EW

Brands by name

Popular brands