manualshive.com logo in svg

MTU MS150112/01E, Operating Instructions Manual

Share
Download
MTU MS150112/01E Operating Instructions Manual Download Page 19

1 M55 - Donor cylinder flap
2 B44.3 - Turbocharger C

speed

3 B10.1 - Charge-air pres-

sure, A-side

4 M53 - EGR shutoff flap
5 A19 - EIL connection

6 B9 - Charge-air tempera-

ture

7 Y39.A1-A6 - Injectors A1-

A6

8 B34.3 - Fuel pressure be-

fore supplementary filter

9 B34.2 - Fuel pressure be-

fore filter

10 B34.1 - Fuel pressure after

filter

11 F46 - Leak-off fuel level
12 B5.3 - Lube-oil pressure

before filter

13 B7 - Lube oil temperature
14 B44.1 - Turbocharger A

speed

15 B4 - Exhaust temperature

The injectors (6) are underneath the cylinder head covers of the cylinders. Injector replacement and
associated activities (→ Page 117).

MS150112/01E 2014-10

| General Information | 19

TIM-ID: 0000045455 - 001

Summary of Contents for MS150112/01E























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands