manualshive.com logo in svg

MTU MS150112/01E, Operating Instructions Manual

Share
Download
MTU MS150112/01E Operating Instructions Manual Download Page 112

7.5.3 Valve clearance – Check and adjustment

Preconditions

☑

Engine is stopped and starting disabled.

☑

Coolant temperature max. 40 °C.

☑

Valves are closed.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Feeler gauge

Y20098771

1

Allen key

F30002815

1

Torque wrench, 60-320 Nm

F30452768

1

Socket wrench, 24 mm

F30039526

1

Engine oil

Preparatory steps

1.

Remove cylinder head cover (→ Page 115).

2.

Install barring device (→ Page 99).

Note:

The OT mark (1) (if fitted) on the flywheel
must not be used for reference.

3.

Rotate crankshaft with barring device in en-
gine direction of rotation until "OT-A1"
mark and pointer are aligned.

112 | Task Description | MS150112/01E 2014-10

TIM-ID: 0000026629 - 003

Summary of Contents for MS150112/01E























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands