manualshive.com logo in svg

MTU MS150112/01E, Operating Instructions Manual

Share
Download
MTU MS150112/01E Operating Instructions Manual Download Page 142

7.12.2 EGR cooler – Cleaning

Preconditions

☑

Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Cleaning agent (Hakupur 312)

30390

1

WARNING

Compressed air gun ejects a jet of pressurized air.

Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!

• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.

NOTICE

Contamination of components.

Damage to component!

• Observe manufacturer's instructions.
• Check components for special cleanliness.

Cleaning EGR cooler

1.

Clean all parts as shown in overview drawing (→ Page 141) with cleaning agent (Hakupur 312).

2.

Blow out all parts with compressed air.

142 | Task Description | MS150112/01E 2014-10

TIM-ID: 0000045524 - 001

Summary of Contents for MS150112/01E























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands