7.10.2 Exhaust turbocharger (LP) – Turbine housing check
Preconditions
☑
Engine is stopped and starting disabled.
☑
MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Endoscope
Y20097353
1
Torque wrench, 10-60 Nm
F30452769
1
Torque wrench, 60-320 Nm
F30452768
1
Socket for lambda sensor / NOx sensor
F30453932
1
Engine oil
Assembly paste (Ultra-Therm MTU)
50547
1
O-ring
(→ Spare Parts Catalog)
WARNING
Component is hot.
Risk of burning!
• Wear protective gloves.
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
Preparatory steps, general
1.
Drain engine coolant (→ Page 164).
2.
Drain charge-air coolant (→ Page 174).
Preparatory steps – exhaust tur-
bocharger (LP), right side
1.
Loosen screws on pipe half-clamps (2, 3)
and remove coolant vent lines (1, 4) from
heat shield and holders.
2.
Remove pipe half-clamps (2, 3) with cool-
ant vent lines (1, 4) from heat shield and
holders.
126 | Task Description | MS150112/01E 2014-10
TIM-ID: 0000026820 - 005
