manualshive.com logo in svg

MTU MS150112/01E, Operating Instructions Manual

Share
Download
MTU MS150112/01E Operating Instructions Manual Download Page 182

7.19 Battery-Charging Generator

7.19.1 Checking battery-charging generator

Preconditions

☑

Engine is stopped and starting disabled.

WARNING

Air jet from compressed-air gun.

Risk of injury to eyes and organs! Risk of hearing damage!

• Never direct a compressed-air jet at persons.
• Wear goggles/safety mask and ear protectors.

Checking battery-charging generator

Item

Findings

Action

Ventilation area (arrow)

Clean

None

Ventilation area (arrows)

Contaminated

Clean

Cleaning battery-charging generator

Note:

Dry-clean battery-charging generator only. Do not insert sharp objects into the ventilation holes.

1.

Remove coarse dirt from battery-charging generator.

2.

Blow out ventilation area (arrow) with compressed air until all dust is cleared.

182 | Task Description | MS150112/01E 2014-10

TIM-ID: 0000030224 - 003

Summary of Contents for MS150112/01E























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands