Final steps – exhaust turbo-
charger (LP), right side
1.
Install NOx sensor (1) on exhaust elbow and use a torque wrench and socket for NOx sensor to tighten
to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Sensor
M20 x 1.5 Tightening torque
50 Nm ±10 Nm
2.
Install pipe half-clamps (2, 3) and coolant
vent lines (1, 4) on heat shield and holder.
3.
Tighten screws.
MS150112/01E 2014-10
| Task Description | 131
TIM-ID: 0000026820 - 005
