manualshive.com logo in svg

MTU MS150112/01E, Operating Instructions Manual

Share
Download
MTU MS150112/01E Operating Instructions Manual Download Page 177

7.17.4 Charge-air coolant – Filling

Preconditions

☑

Engine is stopped and starting disabled.

☑

MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Charge-air coolant

WARNING

Coolant is hot and highly pressurized.

Risk of injury! Risk of scalding!

• Allow engine to cool down.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.

NOTICE

Filling cold coolant into a hot engine can result in thermal stress.

Danger of crack formation in engine!

• Only fill or top up coolant with the engine cold.

Preparatory steps

1.

Turn cap (1) of coolant expansion tank (ex-
ternal) counterclockwise until the first stop
and allow pressure to escape.

2.

Continue to turn cap (1) counterclockwise
and remove.

MS150112/01E 2014-10

| Task Description | 177

TIM-ID: 0000026958 - 005

Summary of Contents for MS150112/01E























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands