ioLogik W5300
Click&Go Logic
4-15
Working with Logic
Click&Go Logic Basics
The Click&Go Logic panel is available after logging in as administrator. This is where Click&Go logic is
configured. With a set of rules (known as a rule-set) defined through Click&Go, the ioLogik can perform local
and remote I/O control, report I/O status, and actively send out messages, e-mails, or SNMP traps to a host as
soon as the user-defined I/O conditions have been met.
To use Click&Go Logic, start ioAdmin and log in as ioLogik administrator from the Server Settings panel. Once
you are logged in, go to the Click&Go Logic panel. The following screen should appear:
Click&Go Logic Panel
1.
Global Variable: In this field, you can configure global variable rules.
2.
Logic Name: In this field, you can assign a name to the set of rules.
3.
Rule-set: In this area, each rule’s conditions, actions, and status are displayed.
4.
Rule-set Management Bar: In this area, you manage the rule-set.
Rules are the building blocks of your ioLogik system. With rules, you define the exact trigger conditions for
transmission of I/O information as well as the content and destination of that information.
Click&Go Logic can be defined in the following ways:
