ioLogik W5300
Click&Go Logic
4-6
Digital Output Mode Selection
A DO channel can be set to
DO
or
Pulse Output
mode. The Relay Output behavior is the same as DO.
Model
Number of Digital
Output Channels
Mode Selection
DO
Pulse Output
ioLogik W5340-HSPA
8 DIOs + 2 Relays
ioLogik W5340
8 DIOs + 2 Relays
ioLogik W5312
8 DOs + 4 DIOs
When logged in as an administrator, double
click on a channel on the
I/O
Configuration
panel to configure that
channel’s settings. A window will open with
configuration options for that channel. Each
DO channel will be configured to act as
either a DO or Pulse Output channel,
according to the
Mode Settings
. To switch
between DO and Pulse Output channel
operation, select the desired mode under
Mode Settings.
Analog Input Mode Selection
Analog input channels can use either voltage or current to transmit signals.
Model
Number of Analog Input Channels
Mode Selection
Voltage
Current
ioLogik W5340-HSPA
ioLogik W5340
4
±5 V, ±10 V, 0-10 V
0 to 20 mA,
4 to 20 mA
When logged in as administrator, double click on
a channel on the
I/O Configuration
panel to
configure that channel’s settings. A window will
open with configuration options for that channel.
Each AI channel will be configured to measure
either voltage or current according to the
Range
Settings
.
