ioLogik W5300
Click&Go Logic
4-9
SNMP Trap Server
The ioLogik W5300 supports SNMP v2 (Simple
Network Management Protocol) to allow
monitoring of the network and I/O devices with
SNMP Network Management software. It is
useful for building automation and telecom
applications. Before monitoring the system
information of an ioLogik via SNMP trap, first
define a rule in Click &Go logic to update the
I/O status (up to 10 SNMP trap servers can be
defined).
E-Mail Server
The
E-mail Server
configures the parameters of
the target e-mail servers and
the recipient e-mail addresses.
The
Recipient Database
should contain a list of
available e-mail addresses for
your network environment.
The e-mail message defined
in the Click&Go logic will be
sent to all addresses listed in
the
Receiver(s) list
. To add
e-mail addresses to the
Available receiver(s) list
,
enter the
Name
and
Address
and click the
Add
finger icon to move addresses
to the
Recipient Database
;
use the
Remove
finger icon
to remove it.
Under Mail Server Settings, you must configure the address of the SMTP server with your username and
password. When using an FQDN (Fully Qualified Domain Name) address, such as ms.moxa.com, you must
specify the ioLogik’s DNS settings or check the Cellular Settings to see if the DNS settings were retrieved by the
cellular connection.
