87
TROUBLESHOOTING GUIDE TO IMPROVE YOUR RECIPES
TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
SOLUTIONS
The kneading paddle
is stuck in the pan.
Let it soak before removing it.
After pressing on
nothing happens.
• The machine is too hot. The following error message will
be shown: EO1 and 5 beeps. Wait 1 hour between 2 cycles.
• A delayed start has been programmed.
• The programme includes preheating.
After pressing on
the motor is on but
no kneading takes place.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
After a delayed start,
the bread has not
risen enough
or nothing happens.
• You forgot to press on
after programming a delayed start
programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
Burnt smell.
• Some of the ingredients have fallen outside the pan:
unplug the appliance, let it cool down, then clean the inside
with a damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given
in the recipe.
Not getting the expected
results?
This table will help you.
Bread
rises
too much
Bread falls
after rising
too much
Bread does
not rise
enough
Crust not
golden
enough
Sides brown
but bread not
fully cooked
Top
and sides
floury
The
button was pressed
during baking
Not enough flour
Too much flour
Not enough yeast
Too much yeast
Not enough water
Too much water
Not enough sugar
Poor quality flour
Wrong proportions
of ingredients (too much)
Water too hot
Water too cold
Wrong programme
MLX-OW2000-NC00020772_MLX-OW2000-NC00020772 21/12/10 11:08 Page87
