Motorola WS5100 Series, Cli Reference Manual

Page: 77 / 492

Common Commands 2-37
vlan3 unassigned up up
WS5100(config-if)#
shutdown
c. Check the stauts. Note that the VLAN has now been disassociated and the status
is DOWN.
WS5100(config)#show ip interface brief
Interface IP-Address Status Protocol
vlan1 157.235.208.69(DHCP) up up
vlan3 unassigned administratively down down
WS5100(config)#
2. The above example could also occur when a DHCP interface is disconnected. DHCP is
not effected though, because it runs on a virtual interface and not on a physical
interface. In this case, it is the physical interface that is disconnected not the virtual
interface. When the ethernet interface comes back up, it will restart the dDHCP client
on any virtual interfaces (SVIs) of which the physical interface is a member port. This
ensures if the interface was disconnected and reconnected to a different interface it
will obtain a new IP address, route, name server, domain name etc. corresponding to
the new DHCP server configuration.
Example
WS5100(config)# show ip access-group eth 1
Interface eth1
Inbound IP Access List :
Inbound MAC Access List :
WS5100(config)#show ip access-group vlan 1
Interface vlan1
Inbound IP Access List :
WS5100(config)#show ip access-group eth2
Interface eth2
Inbound IP Access List :
Inbound MAC Access List :
WS5100# show ip dhcp binding
IP MAC/Client-Id Type Expiry Time
-- ------------- ---- -----------
WS5100(config)# show ip dhcp class
!
ip dhcp class TestClass2
option user-class MC900
!
ip dhcp class BlahBlahBlah
!
ip dhcp class ClassNameTest