Motorola WS5100 Series, Cli Reference Manual

Page: 300 / 492

WS5100 Series Switch CLI Reference Guide 12-18
Parameters
Usage Guidelines
Set the interface speed to auto to detect and use the fastest speed available. Speed
detection is based on connected network hardware
Example
WS5100(config-if)#speed auto
WS5100(config-if)#
12.1.18 static-channel-group
Interface Config Commands
Adds an interface to a static channel group
Syntax
static-channel-group <1-2>
Parameters
Usage Guidelines
This command aggregates individual giga port’s into a single aggregate link to provide a
larger bandwidth. The static channel group is used to provide additional bandwidth in
multiples of 1Gbps on the switch. All MAC layer and higher protocols see only the static
channel group (aggregate link) rather than the individual ports that comprise it.
Example
WS5100(config-if)#static-channel-group 2
WS5100(config-if)#
10 Forces 10 Mbps operation
100 Forces 100 Mbps operation
1000 Forces 1000 Mbps operation
auto Port automatically detects the speed it should run based on
the port at the other end of the link
<1-2> Sets a static channel group to associate the link with