Motorola WS5100 Series, Cli Reference Manual

Page: 361 / 492

DHCP Server Instance 17-3
17.1.1 address
DHCP Config Commands
Specifies a range of addresses for the DHCP network pool
Syntax
address (range) (low IP address) (high IP address)
Parameters
Usage Guidelines
Use the
address
comand to specify a range of addresses for the DHCP network pool. The
DHCP server assigns IP address to DHCP clients from the address range. A high IP address
is the upper limit for providing the IP address, and a low IP address is the lower limit for
providing the IP address
Use the
no address (range)
command to remove the DHCP address range
Example
WS5100(config-dhcp)#address range 2.2.2.2 2.2.2.50
WS5100(config-dhcp)#
17.1.2 bootfile
DHCP Config Commands
Assigns a bootfile name for the DHCP configuration on the network pool
Syntax
bootfile <filename>
range (low IP address) (high IP
address) Adds an address range for the DHCP server
• low IP address – Defines the first IP address
in the address range
• high IP address – Defines the last IP address
in the address range