Motorola WS5100 Series, Cli Reference Manual

Page: 424 / 492

WS5100 Series Switch CLI Reference Guide 20-6
20.1.5 ap-detection
Wireless Configuration Commands
Configures access port detection parameters
Syntax
ap-detection
[approved|enable|mu-assisted-scan|timeout (approved|unapproved)]
ap-detection approved add <1-200> (MAC Address)(SSID)
ap-detection mu-assisted-scan(enable|refresh<300-86400>)
Parameters
aap-version AP detection configuration commands
approved Sets the approved access port list
• add <1-200> – Adds an entry to the approved access port
list
• MAC Address – Select either:
• MAC– Define a MAC address
(in AA-BB-CC-DD-EE-FF format)
• any– Assigns any MAC address
• SSID – Select either:
• LINE–Enter a string up to 32 characters
• any– Assigns any SSID
enable Allows access ports to look for APs
mu-assisted-scan Sets mobile unit assisted scanning configuration
• enable – Enables mobile unit assisted scanning
• refresh <30-86400> – Defines the period (in seconds)
used by all scan-capable mobile units are polled to scan
for neighboring access ports
timeout <1-65535> The amount of time (in seconds) an AP remains in the list
after it is no longer seen
• approved
• unapproved