Motorola WS5100 Series, Cli Reference Manual

Page: 439 / 492

Wireless Instance 20-21
Parameters
anomaly-detection
{options} (enable|filter-
ageout) Configures parameters related to the detection of
anomalous frames on the RF network
• all – Enables all types of anomalous frames
• average-noise-level [enable|filter-ageout|threshold] –
Enables and sets the filters and threshold levels for
sudden changes in RSSI
• threshold – Sets the threshold for sudden
changes in RSSI
• bad-essid-frame – Enables an AP detector to find frames
with bad ESSIDs
• beacon-broadcast-essid – Enables an AP detector to find
beacons with broadcast ESSIDs
• invalid-8021x-frame – Detects invalid 802.1x frames
• invalid-frame-length – Detects frames with an invalid
length
• invalid-frame-type – Detects frames with an invalid type
• multicast-source – Broadcast or multicast source
• non-changing-wep-iv – Detects frames wit h
a non-changing WEP IV
• null-destination – Sets all zeros for an address
• same-source-destination – Identical source and
destination addresses
• tkip-countermeasures – Filters mobile units causing
TKIIP countermeasures
• unencrypted-traffic – Detects unencrypted-traffic
• weak-wep-iv – Uses weak WEP sequence numbers
• enable – Enables monitoring and filtering
• filter-ageout – Sets the number of seconds
mobile units are filtered out
detect-window <5-300> Sets the number of seconds information is collected before
analysis. All thresholds are a function of this window size