Motorola WS5100 Series, Cli Reference Manual

Page: 451 / 492

Wireless Instance 20-33
copy-config-from
[<1-1000>|default-11a|
default-11b|
default-11bg] Copies the configuration from a previously configured radio
• <1-1000> – Defines a single radio index
• default-11a – Uses the default 11a configuration
template
• default-11b – Uses the default 11b configuration
template
• default-11bg – Uses the default 11bg configuration
template
description Defines a description for this radio
detector Dedicates this radio as a detector. No mobile units can
associate to a detector
dtim-period <1-50> bss
<1-4>
Set the DTIM period (number of beacons between
successive DTIMs)
radio dtim-period <1-50> bss <1-4>
• <1-50> – Sets the DTIM period
• bss <1-4> – BSS index
enforce-spec-mgmt
(enable) Enforces spectrum management checks on specified radios.
Only mobile units that advertise spectrum management
capabilities will be allowed to associate on this radio
enhanced-beacon-table Enables the enhanced beacon table for AP locationing
enhanced-probe-table Enables the enhanced probe table for MU locationing
location-led
[start-flashing|stop-
flashing]
Changes the mode of operation of the LEDs on an AP
• start-flashing – Requests parent-ap of specified radio to
begin flashing its LEDs to help locate it
• stop-flashing – Requests parent-ap of specified radio to
revert its LEDs to normal mode of operation
location-message Specifies a message sent to all mobile units that associate
with these radios. This message should not exceed 80
characters