Motorola WS5100 Series, Cli Reference Manual

Page: 351 / 492

Extended MAC ACL Instance 16-7
Usage Guidelines
Use the mark option to specify the t ype of service (tos) and priority value. The tos value is
marked in the IP header and the 802.1p priority value is marked in the dot1q frame.
Whenever the interface receives the packet, its content is checked against all the ACEs
in the ACL. It is marked based on the ACL’s configuration.
Example
The example below marks the dot1p priority value to 6 for all 802.1q tagged traffic from
VLAN interface 5
Source MAC Address Specifies the bits to match. The source wildcard can
be any one of the following:
•
xx:xx:xx:xx:xx:xx/
xx:xx:xx:xx:xx:xx
–Source MAC address
and mask
• any – Any source host
• host
–
Exact source MAC address to match
Destination MAC Address Specifies the bits to match. The destination
wildcard can be any one of the following:
• xx:xx:xx:xx:xx:xx/
xx:xx:xx:xx:xx:xx
–Destination MAC
address and mask
• any – Any destination host
• host
–
Exact destination MAC address to
match
dot1p <0-7> Defines a VLAN 802.1p priority value to match
rule-precedence <1-5000> Establishes an access-list entry precedence
type( <1-
65535> |arp|ip|ipv6|vlan|wisp)
Defines an ethertype value represented as an
integer or keyword for well-known ethertypes (like
IP, IPv6, ARP etc.)
vlan <1-4095> Defines the VLAN tag ID to match