Motorola WS5100 Series, Cli Reference Manual

Page: 143 / 492

Privileged Exec Commands 4-11
Parameters
Example
4.1.8 configure
Priv Exec Command
Enters into the configuration mode
Syntax
configure terminal
Parameters
Example
WS5100#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
WS5100(config)#
4.1.9 copy
Priv Exec Command
Use this command to copy any file (config,log,txt ...etc) from any location to the switch and
vice-versa.
Syntax
copy (FILE|URL) (FILE|URL)
enable Enables the switch cluster context
terminal Configure from the terminal
NOTE: Copying a new config file onto an existing running-config file
merges it with the existing running-config on the switch. Both, the
existing running-config and the new config file are applied as the
current running-config.
Copying a new config file onto a start-up config files replaces the
existing start-up config file with the parameters of the new file. It is
better to erase the existing start-up config file from and then copy the
new config file to the startup config.