Motorola WS5100 Series, Cli Reference Manual

Page: 420 / 492

WS5100 Series Switch CLI Reference Guide 20-2
ap-timeout Changes the default inactivity timeout for
access ports page 20-9
ap-udp-port Configures the UDP port for AP L3 adoption
NOTE: Enable this option in the DHCP
Server supporting this access-port
page 20-9
broadcast-tx-speed Sets the rate at which broadcast and
multicast traffic is transmitted page 20-10
client Defines the wireless client configuration page 20-10
clrscr Clears the display screen page 20-14
convert-ap Changes an AP’s mode of operation page 20-14
country-code Configures the country of operation. All
existing radio configurations are erased page 20-15
dhcp-sniff-state Records mobile unit DHCP state
information page 20-17
dot11-shared-key-auth Enables support for 802.11 shared key
authentication page 20-18
end Ends the current mode and moves to the
EXEC mode page 20-18
exit Ends the current mode and moves to the
previous mode page 20-19
fix-broadcast-dhcp-rsp Converts broadcast DHCP server
responses to unicast responses page 20-19
help Displays the interactive help system page 20-19
ids Sets intrusion detection configuration
commands page 20-20
Table 20.1 Wireless Config Command Summary (Continued)
Command Description Ref.