Motorola WS5100 Series, Cli Reference Manual

Page: 362 / 492

WS5100 Series Switch CLI Reference Guide 17-4
Parameters
Usage Guidelines
Use the
bootfile
command to specify the boot image. The boot file contains the boot
image name used for booting the bootp clients (DHCP clients). Only one boot file is allowed
per pool.
Use
[no] bootfile
command to remove the bootfile. Do not use the <file name> with
the bootfile command as only one bootfile exists per pool. The command
[no] bootfile
removes the exisitng command from the pool.
Example
WS5100(config-dhcp)#bootfile bootexample.txt
WS5100(config-dhcp)#
17.1.3 class
DHCP Config Commands
Associates a DHCP class with a pool. This command is used in Step 4 in the usage
guidelines that follow.
The CLI prompt moves to a sub-instance
(config-dhcp-class).
The configuration mode
changes from
(config-dhcp)# class
to
(config-dhcp-class)
.
Refer to config-dhcp-class on page 17-5 for (config-dhcp-class) a command summary.
Syntax
class (class name)
Parameters
bootfile <filename> Sets the boot image for BOOTP clients. The file
name can contain letters, numbers, dots and
hyphens. Consecutive dots and hyphens are not
permitted.
class (class name) Associates a class with a pool and enters the
DHCP pool class configuration mode