Motorola WS5100 Series, Cli Reference Manual

Page: 319 / 492

Extended ACL Instance 14-9
Parameters
mark {dot1p <0-7> | tos
<0-255>}} {
ip } {source/
source-mask | host source
| any} {destination/
destination-mask | host
destination | any} [log]
[rule-precedence access-
list-entry precedence]
Use with the
mark
command to specify IP packets as marked
• mark {dot1p <0-7> | tos <0-255>} – Defines action
types on an ACL.
mark
is functional only over a Port
ACL
• dot1p <0-7> – Used only with the action type
mark
to specify 8021p priority values
• tos <0-255> – Used only with action the type
mark to specify Type Of Service (tos) values
• {ip} – Specifies an IP (to match any protocol)
• {source/source-mask | host source | any} – The source
is the source IP address of the network or host (in
dotted decimal format). Source-mask is the network
mask. For example, 10.1.1.10/24 indicates the first 24
bits of the source IP are used for matching
• any is an abbreviation for source IP of 0.0.0.0 and
source-mask bits equal to 0
• host is an abbreviation for the exact source
(A.B.C.D) and source-mask bits equal to 32
• {destination/destination-mask | host destination |
any} – Defines the destination host IP address or
destination network address
• [log] – Generates log messages when the packet
coming from the interface matches the ACL entry. Log
messages are generated only for router ACLs
• [rule-precedence access-list-entry precedence] – Sets
an integer value between 1-5000. This value sets the
rule precedence in the ACL